Traction Power Cable
![Traction Cable](https://www.electrocables.com/wp-content/uploads/2024/06/Traction-Cable.png)
Temperature Range:
-40°C Cold Bend and -40°C Cold Impact
Conductor:
Stranded Soft Copper, ASTM B8
Insulation:
Cross-linked Polyethylene Insulation (XLPE) CSA Type XL 90°C dry/wet 2000V
Jacket:
Thermoplastic Low Smoke Zero Halogen
RW90
FLAME
RATINGLOW
TEMPHIGH
TEMPLimited
SMOKEHalogen
FreeUV
ResistantWET
LOCATIONChemical
ResistantOil
ResistantImpact
ResistantTRAY
CABLE (TC)Exposed
RunDIRECT
BURIALTray Cable
Hazardous
Location
TRACTION POWER CABLE 2000V
Specifications and Compliance:
- • CSA C22.2 No. 38, Thermoset-insulated wires and cables (Type RW90)
- • CSA C22.2 No. 230, Tray Cables Exposed Run (Type TC-ER)
- • CSA C22.2 No. 2556 FT4-ST1 IEEE 1202/UL 1685
- • NFPA 130 Smoke and Flame requirements.
- • -40°C Cold Bend and -40°C Cold Impact
- • Sunlight Resistant, Direct Burial, Low Acid Gas (AG14)
Applications:
For use in raceways, ventilated, non-ventilated and ladder-type cable trays.
For dry, damp or wet locations, in ceiling air-handling plenums, direct burial, exposed and concealed wiring.
Single conductor 1/0 and larger are Tray Cable approved.
8 AWG to 1 AWG green jacketed are accepted for installation in cable tray for Bonding/Grounding applications.
For use in Hazardous locations: Zone 0 (intrinsically safe cables only), Zone 2, Zone 22 (per Section 18).
Cables marked TC-ER tray cable are permitted for exposed runs as per CE Code Part I 12-2202 3) and 4).
To add or modify your quote request, please log in
For specifications, please contact our sales team at 1-888-ELECTRO (613-394-4896) or sales@electrocables.com.